AcrEase Pull Behind Mowers and Till-Ease Tillage Equipment header pic.
<< Home << Products << Features & Options << Distributors << Contact Us << Order Parts
<< Questions & Answers << Download Manuals << Warranty Registration << Company History
FEATURES
THE ACREASE ROUGH CUT MOWER FEATURES




The AcrEase Rough Cut Mowers feature the following:
1. Large Engines - The AcrEase Rough Cut Mowers come with large 19-20 HP electric start engines on the 44" models and 23-27 HP electric start engines on the 57" models. Both commercial and non-commercial grade engines are available.



25 HP Kohler Confidant Series commercial grade twin cylinder engine used on the model MR55KE.



20-27 HP Briggs & Stratton Commercial Turf Series commercial grade twin cylinder engine used on the models MR44BC, MR55B & MR55BE.



19 HP Briggs & Stratton Professional Series non-commercial grade single cylinder engine used on the model MR44B.

2. Blade Spindles and Twin Blades - The blade spindles used on the AcrEase are built out of heavy duty welded steel hubs, 30 mm (1-3/16") shafts, machined steel blade holders and large 30 mm bearings. These spindles are capable of handling 2" diameter saplings and other unforeseen objects without any worry about bending. The twin blade design on the AcrEase provides more of a mulch action that reduces the size of the clippings and reduces bunching.



Heavy duty blade spindles.



Twin blade design.



2" diameter saplings.

3. Height Adjustment - The cutting height is easily adjusted from 2" - 8" by turning a single crank on the 44" models and two cranks on the 57" models. An optional Electric Lift Kit is available as well.



Height adjust crank on 57" model.



Height adjust crank on 44" model.

4. Deck Design - The AcrEase deck is the heaviest built in the industry. The main deck on the 57" models is built out of 10 GA (.135") steel with 7 GA (.179") side plates. The main deck and side plates on the 44" models is built out of 8 GA (.164") steel. The backbone of the deck is an open channel design that is built out of 1/4" thick steel on the 57" models and 7 GA (.179") thick steel on the 44" models. There is also an additional 1/4" thick steel plate welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to over 5/8" thick on the 57" models and over 9/16" thick on the 44" models.



Heavy duty open channel design is backbone of deck.



Three layers in blade spindle mounting area.

5. Four Tire Design - The four tire design used on the AcrEase provides a great deal of stability and allows the mower to traverse very rough ground. The four tire design also allows the AcrEase to use a free pivoting tongue which eliminates bind ups. The design also places the tires within the width of the deck allowing for an obstruction free trim edge on both sides of the mower.



Four tire design and free pivoting tongue allow for drastic terrain changes.



Unobstructed trim edge on each side of the mower.

6. Blade Engagement - The AcrEase Rough Cut Mowers have two methods for blade engagement. The 44" models and one of the 57" models use a manual lever engagement system. The Models MR55BE and MR55KE use an electric clutch for blade engagement. The manual clutch system is more than adequate for most customers but for high hour commercial use the electric clutch is a great way to go.



Maunal clutch engagement lever.



Electric clutch engagement switch.

7. ATV Tongue - The ATV Tongue comes standard on the AcrEase Rough Cut Mowers and will allow for rapid transitions between direct behind and full offset pulling. The ATV Tongue is adjustable from side to side when overlap adjustments need to be made. The ATV Tongue also features a farm clevis which provides more degrees of motion than standard hitching systems. This is necessary because the AcrEase can be used on terrain that would bind up standard hitching systems such as a ball hitch.



Offset position.



Direct behind position.



Farm clevis.

8. Large Gas Tank - The AcrEase uses a 3 Gal gas tank that provides about 3 hours of run time.



Large 3 gal. gas tank.

Home Page , Products , Features and Options , Distributors , Contact Us , Order Parts
Questions and Answers , Download Manuals , Warranty Registration , Company History

Contact us at: info@kunzeng.com